Wishlist
[ti_wishlist_products_counter]
Client Case Study : Statewide Educator Conference

STEM Best Practices 2026

A single-day conference for Utah's K-12 STEM teachers, built as one continuous LEGO environment for Utah STEM Action Center. Entrance, registration, general session stage, and four hands-on build tables, at the Ogden Eccles Conference Center.

Project Brief
Client Utah STEM Action Center
Venue Ogden Eccles Conference Center
Format Single-Day Educator Conference
Theme Custom LEGO Environment
Scope Full Environmental Build + AV

Utah STEM Action Center trains K-12 teachers one day at a time.In The Event handled the design, planning, and execution behind it.

Utah STEM Action Center was created by the state legislature to get every Utah classroom real access to STEM education. Best Practices is the center's annual professional development conference for K-12 teachers: a keynote, four rounds of breakout sessions, and a lunch full of exhibitors and posters. The Ogden session ran June 30, 2026, at the Eccles Conference Center. In The Event handled the design, planning, and execution for the entire day: the environment, the registration platform, and the broadcast package running behind every session, LEGO themed from the front door to the general session stage.

The general session stage carried the heaviest technical load of the build. Illuminated LEGO brick risers and towers framed a boxwood step-and-repeat and a custom scenic wall built to the client's final design, with a clear podium and its own custom graphic center stage. Behind that decor ran the actual production: a video switcher cutting between camera and graphics, a camera feed solving the sightline problem for a ballroom seating a full day of breakout groups, coordinated wireless microphones, and confidence monitors so presenters could read their own timer while still facing the room.

Client Utah STEM Action Center
Venue Ogden Eccles Conference Center
Event Date June 30, 2026
Format Single-Day Conference, 8am – 4pm
Breakout Sessions 4 Rounds · 2 Meeting Rooms
Registration Cvent Platform + On-Site Badging
General Session AV Video Switcher · Camera Feed · Wireless Mics
Theme Custom LEGO Environment

The Challenge

The stage did two jobs at once. It read as oversized LEGO brick construction from the back of the ballroom, and it worked as a real presentation platform: risers built to hold real weight, a wheelchair ramp, a podium built to hold a presenter through four rounds of breakouts plus a keynote. That's a structural fabrication job, engineered to carry a person's full weight while reading as toy bricks from thirty feet back.

Running it meant coordinating wireless microphones for a full day of rotating presenters, a video switcher cutting between the camera feed and graphics, and confidence monitors for people running a countdown clock for the first time. In The Event built and tested all of it the day before doors opened, with no rehearsal slack once check-in started at 8am.

  • 20' x 10' LEGO stage scenic with reinforced risers and a wheelchair ramp
  • Boxwood step-and-repeat with custom scenic backdrop wall
  • 16' x 8' boxwood entrance photo op with reusable client logo
  • 12' x 8.5' LEGO-pattern walk-through arch entrance
  • Video switcher, camera feed to the room's screens, and coordinated wireless mics
  • Cvent registration platform with on-site badge printing
STEM Best Practices 2026 boxwood photo op and LEGO walk-through arch, Ogden Eccles Conference Center lobby
First-Floor Lobby STEM Best Practices 2026. The boxwood photo op and LEGO arch, the first build teachers saw walking in
Full-Service Production

Services Delivered

Six builds went up as one coordinated system, engineered by one crew in a single build day: the entrance, the stage, the broadcast package, registration, the activity stations, and signage.

Entrance & Photo Ops The boxwood wall and LEGO arch both work as a real photo backdrop, durable through a full day of phone flashes and foot traffic. The 16-foot boxwood wall in the first-floor lobby carries a reusable vinyl cutout of the STEM Action Center logo. Next to it, a 12-foot walk-through arch is a full LEGO-pattern spandex print over a curved frame, built for teachers to pass straight through on their way in.
General Session Stage Twenty feet by ten feet of illuminated LEGO brick risers and towers in red, yellow, green, and blue, engineered to hold a presenter's full weight while reading as toy bricks from the back row. A boxwood backdrop and custom step-and-repeat, printed to the client's final design, framed a clear podium carrying its own graphic panel. Fifty matching LED disk lights carried the same brick motif out onto every table in the room.
General Session AV A video switcher cutting between the camera feed and graphics, wireless microphones coordinated for a full day of presenters, confidence monitors with a countdown clock, and dual-screen projection running the welcome graphic across the room.
Registration On-site badge printing, iPad check-in stands, and custom-graphic mod counters built around the Cvent registration platform running behind them. Teachers checked in, printed a badge, and walked straight to their breakout room.
Building STEM Identity Branded counters on the second floor, each topped with a custom road-map graphic named for real Utah streets: Circuit Street, Discovery Loop, Wasatch Way, Beehive Drive. Teachers wrote their own answer to "How do you STEM?" on oversized building blocks and stacked them into a skyline over the course of the day.
Signage & Wayfinding Custom signage for every meeting room, listing presenters and session titles by grade band, plus digital displays at the ballroom entrances running the full day's schedule from check-in to prize drawing.
STEM Best Practices 2026 Building STEM Identity tables with teacher-built LEGO towers, Ogden Eccles Conference Center
Activity Stations STEM Best Practices 2026. One of several build zones running throughout the day

The Execution

In The Event loaded in on June 29th and spent the day building the full environment: the stage scenic, the entrance, the registration counters, and the complete broadcast package, all tested and ready well ahead of check-in at 8am on June 30th.

In The Event ran the day from the inside. A showcaller called cues through the keynote and all four rounds of breakouts, coordinating lighting, sound, and video with the stage in real time. An Account Executive worked on-site as Utah STEM Action Center's single point of contact, managing the crew, the schedule, and every vendor from check-in through the 3:30pm prize drawing.

  • Full LEGO environment built in a single day, ready for 8am check-in
  • Showcaller running cues through the keynote and four breakout rounds
  • On-site Account Executive as the single point of contact all day
  • Broadcast AV and registration staffed for the full day
  • Full signage system across every meeting room, all day
  • Same-day strike and load-out

STEM Best Practices 2026 · Ogden Eccles Conference Center

Event Gallery

From the Conference Floor

A look at the entrance, stage, registration, and signage the In The Event team built for STEM Best Practices 2026.

Production Schedule

How We Built It

Seven months of design. One build day. One full day of conference. Same-day strike. One team.

01
02
03
04
Design & Planning Nov 2025 – Jun 2026 Seven months out

Design work started in November 2025. In The Event developed the full LEGO concept with Utah STEM Action Center: custom graphics for the stage, entrance, registration counters, and activity stations. From there, fabrication, the broadcast package, and the Cvent registration platform were all scheduled for a June install.

Load-In & Build June 29, 2026 Full build day

In The Event loaded in on June 29th and spent the day building the full LEGO environment: the stage scenic, the boxwood entrance and walk-through arch, the registration counters, the four activity tables, and the complete general session broadcast package. Every piece was placed and tested well ahead of check-in the next morning.

Run June 30, 2026 8:00 am – 4:00 pm

Check-in opened at 8am, followed by a welcome, keynote, and four rounds of breakout sessions across two meeting rooms. Lunch brought exhibitors and posters into the ballroom. In The Event ran the broadcast package through every session and kept the build tables stocked as teachers stopped by between rounds. The day closed with a 3:30pm prize drawing.

Strike & Wrap-Up June 30, 2026 After 4:00 pm

Strike followed the prize drawing the same day. The stage scenic, entrance builds, registration counters, and activity tables were broken down and loaded out, and the Ogden Eccles Conference Center was returned to its standard configuration before the venue closed for the night.

Ready to build something this good?

Tell us about your next conference, summit, or educator event. In The Event handles everything from concept to close. One team, one roof.

Privacy Policy
crosschevron-down